Sawdust drying machine

Introduction of Sawdust drying machine

For raw materials with heavy humidity which is above 12%, you need to install a drying machine before further processing

This air current type drying machine can reduce the humidity of wood materials below 12% per time

The cost of this air current drying machine is much lower than rotary drying machine

It is professionally designed for drying different kinds of wood sawdust

It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, and more

In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation

Mechanical structureand working principle of Sawdust drying machine:

Regarding TDS-I and TDS-II type drying machine (with one stove), it is suitable to process materials which moisture content between 20 to 25%

It can reduce the MS to 8 to 12% one drying time

Regarding TDS-III (with two stoves), it is suitable to process materials which moisture content between 35 to 50%

It can reduce the humidity to 8 to 12% one drying time

That means it can reduce approximately 30% for one drying time

But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel

All of round places can be adjusted to any angle of 360 centigrade degree according to operation request

Clients can change the angle of drying machines base on the production field

Technical Specification of Sawdust drying machine: